Page 1 of 1

Simulation Comparison

PostPosted: Thu 14. Jul 2011, 10:30
by Helmar.Waiczies
Hi All,

im opening this Topic for all discussion regarding our joint effort for a Simulation Comparison. The results will be summarized and discussed
on our "2nd EM-Simulation meeting for Ultra-Highfield MR" (http://www.mr-em-forum.org/viewtopic.php?f=3&t=5)
All announcements, comments and discussions for the "Simulation Comparison project should take place here...

Attached you'll find the project guidlines

Have Fun
Helmar

Simulation comparison - announcement.pdf
(255.47 KiB) Downloaded 2768 times

Additional Model file

PostPosted: Fri 15. Jul 2011, 14:19
by Tim.Herrmann
I prepared the CAD model in two ACIS Versions.

Now we should have full compatibility to all software packages.

loopcoil_model.zip
(253.69 KiB) Downloaded 2681 times

shield arround the coil

PostPosted: Mon 25. Jul 2011, 10:16
by ramesh
Hello Tim/Helmar,

Usually we have a shield around the coils we simulate, with its diameter equal to the bore of the magnet. And that is something we consider necessary, as it does affect the SAR (though not to any major extent for most of the coils). Is there any reason why you have left it out, or has it been left as the model is just for comparison?

regards
Ramesh

PostPosted: Tue 26. Jul 2011, 21:05
by Helmar.Waiczies
Hi Ramesh,

yes thats right, for comparison purpose its left away, also to limit the size/time of the simulation.
But to proof your point you could simulate one with and one without shield and submit them both... just an idea ...

All the Best and see u soon
Helmar

PostPosted: Thu 28. Jul 2011, 17:58
by ramesh
Hi Helmar,

thanks for the reply..and yes...have done it and will be submitting the same.

regards
Ramesh

Re: Additional Model file

PostPosted: Thu 31. Oct 2013, 16:55
by snowthunder
Tim.Herrmann wrote:I prepared the CAD model in two ACIS Versions.

Now we should have full compatibility to all software packages.

loopcoil_model.zip

Hello,Tim
The loop coil_model canont be unzipped, Could you emai a right modal to me? My email address is snowthunderzhang@gmail.com Sorry for trouble you.