It is currently Mon 20. Nov 2017, 03:59


Simulation Comparison

EM-Field simulation software, SPEAG SEMCAD, CST MWS, Remcom XFDTD
  • Author
  • Message
Offline

Helmar.Waiczies

  • Posts: 8
  • Joined: Wed 17. Nov 2010, 16:55
  • Institut: MDC Berlin

Simulation Comparison

PostThu 14. Jul 2011, 10:30

Hi All,

im opening this Topic for all discussion regarding our joint effort for a Simulation Comparison. The results will be summarized and discussed
on our "2nd EM-Simulation meeting for Ultra-Highfield MR" (http://www.mr-em-forum.org/viewtopic.php?f=3&t=5)
All announcements, comments and discussions for the "Simulation Comparison project should take place here...

Attached you'll find the project guidlines

Have Fun
Helmar

Simulation comparison - announcement.pdf
(255.47 KiB) Downloaded 2767 times
Offline

Tim.Herrmann

  • Posts: 33
  • Joined: Wed 17. Nov 2010, 16:19
  • Institut: Department of Biometry and Medical Informatics/OvG University Magdeburg/ www.uhf-mri.ovgu.de

Additional Model file

PostFri 15. Jul 2011, 14:19

I prepared the CAD model in two ACIS Versions.

Now we should have full compatibility to all software packages.

loopcoil_model.zip
(253.69 KiB) Downloaded 2680 times
Offline

ramesh

  • Posts: 3
  • Joined: Sat 20. Nov 2010, 20:08
  • Institut: SaiRamesh.Raghuraman

shield arround the coil

PostMon 25. Jul 2011, 10:16

Hello Tim/Helmar,

Usually we have a shield around the coils we simulate, with its diameter equal to the bore of the magnet. And that is something we consider necessary, as it does affect the SAR (though not to any major extent for most of the coils). Is there any reason why you have left it out, or has it been left as the model is just for comparison?

regards
Ramesh
Offline

Helmar.Waiczies

  • Posts: 8
  • Joined: Wed 17. Nov 2010, 16:55
  • Institut: MDC Berlin

PostTue 26. Jul 2011, 21:05

Hi Ramesh,

yes thats right, for comparison purpose its left away, also to limit the size/time of the simulation.
But to proof your point you could simulate one with and one without shield and submit them both... just an idea ...

All the Best and see u soon
Helmar
Offline

ramesh

  • Posts: 3
  • Joined: Sat 20. Nov 2010, 20:08
  • Institut: SaiRamesh.Raghuraman

PostThu 28. Jul 2011, 17:58

Hi Helmar,

thanks for the reply..and yes...have done it and will be submitting the same.

regards
Ramesh
Offline

snowthunder

  • Posts: 2
  • Joined: Thu 7. Mar 2013, 09:20
  • Location: 350 Shushanhu Road Hefei 230031, Anhui, P. R. China
  • Institut: The Chinese Academy Of Sceiences

Re: Additional Model file

PostThu 31. Oct 2013, 16:55

Tim.Herrmann wrote:I prepared the CAD model in two ACIS Versions.

Now we should have full compatibility to all software packages.

loopcoil_model.zip

Hello,Tim
The loop coil_model canont be unzipped, Could you emai a right modal to me? My email address is snowthunderzhang@gmail.com Sorry for trouble you.

Return to Modelling with EM-Field Simulation Software

Who is online

Users browsing this forum: No registered users and 1 guest

cron